Error Code
|
Error Message
|
Description
|
Solution
|
001
|
Area Setting Error
|
The area set value is invalid.
|
The project file may not have been transferred
successfully. Transfer the project file again.
|
002
|
Setting value error
|
The variable mapped to the terminal is
incorrect.
Invalid terminal settings.
|
003
|
Device out-of-range error
|
The variable address allocated to the terminal
is not correct.
|
004
|
Too many term. setting
|
The number of terminals is not correct (too
many terminals).
|
005
|
Terminal setting order error
|
The terminal number is not in ascending
order.
|
006
|
Terminal registry short
|
The number of terminals is not correct (too few
terminals).
|
007
|
Duplicated Area Settings
|
The area is registered twice.
|
008
|
Too Many Area Settings
|
The number of areas is not valid (too many
areas).
|
009
|
Driver settings duplicated
|
The driver is registered twice.
|
010
|
I/O settings inconsistent
|
The terminal settings are not correct (Unit I/O
settings are not consistent).
|
011
|
Bit/Integer type inconsistent
|
The terminal settings are not correct (Unit
variable type settings are not consistent).
|
012
|
Setting level value error
|
The set level (driver/area/terminal) value is
invalid.
|
013
|
Data obtaining address error
|
The driver information is not correct.
The controller information is not correct.
|
014
|
Invalid driver ID
|
The driver/Module registry results in an error
and have not been registered.
|
015
|
Area Setting Order Error
|
The area number is not in ascending order.
|
016
|
File version mismatch
|
Not compatible with the driver's file
version
|