You can enhance security so
that only users with password privileges can use this when
monitoring logic programs.
Setup Procedure
From the [Common Settings (R)] menu, point to
[Security (Q)] and select [Security Password (P)] or click on the toolbar.
The password setting screen will open. Select the
[Enable Security Function] check box, and type the password for
each level of user.
Set a password up to eight single-byte
characters long.
Select the [Add User ID] check box to add the
User ID to the Password. As with the password, User IDs can be up
to eight single-byte characters long.
Select [Set up Functions at Each Security Level]
and set the level of [Online Logic Editing].
The security level of Online Logic Monitor
always needs to be equal to or greater than that of the Logic
Monitor. to set security for both of these, be sure to set the
level of Online Logic Monitor first.
on the toolbar.
