32.16.1.5 Explanation of the SUM and SUMP Instructions
The SUM and SUMP instructions both calculate sums. When the SUM
instruction is executed, S2 array elements beginning at address S1
are totaled and the result is saved to D1. The SUM/SUMP
instructions always pass power. If the variables designated to
operands S1 and D1 are not the same type, an error will occur when
using SUM/SUMP instructions. Designate the same variable type in
operands S1 and D1.
Refer to the following for specifying a constant.
When operand D1 is an integer variable
When operand D1 is an integer variable and
you want to input hexadecimal values in operand S2.
When 0x (zero and lower case "x") is input, the following values
become hexadecimal values.
Confirming Execution Results
|
