32.14.3.1 Calculating the Number of Steps When Setting Operands
- SAL/SALP
The following table lists the specifiable content of operands
S1, S2, and D1 for the SAL and SALP instructions.
The number of steps in the SAL and SALP instructions depends on
the specified operand. The following describes how to calculate the
number of steps.
Number of steps in operand S1 + Number of steps in operand S2 +
Number of steps in operand D1 + 1 = Total number of steps in one
instruction
For example, calculating the number of steps
in SAL and SALP instructions.
(For the number of steps in an operand, refer to the operand
settings as follows.)
{Data_1 =1 step} + {10 = 1 step} + {Data_2 = 1 step} + {1 step}
= 4 steps One last step is included in the instruction. Be sure to
add that one step.
|
