32.22.8.1 Calculating the Number of Steps When Setting Operands
- S2H/S2HP
The following shows the configurable conditions for Operands
(S1, D1) in the S2H/S2HP instructions.
The actual number of steps in the S2H/S2HP instructions depends
on the specified operands. The following describes how to calculate
the number of steps.
Number of steps in operand S1 + Number of steps in operand D1 +
1 = Total number of steps in one instruction
For example, calculate the number of steps
in the S2H/S2HP instructions
(For the number of steps in an operand, refer to the operand
settings as follows.)
{Elapsed time = 1 step} + {Total seconds [0] = 2 steps} + {1
step} = 4 steps One last step is included in the instruction. Be
sure to add that one step.
|