32.9.2.3 Confirming Execution Results - JSET/JSETP
-
If a numeric value out of the setting range is
input, an error will occur and the 6706 error code is set to
#L_CalcErrCode. For checking error details, refer to the
#L_CalcErrCode.
-
#L_CalcZero turns on when the value of D1 is
00:00:00.
Program Example
JSET
Stores the defined time in the time variable.
-
When the positive transition instruction turns ON,
the JSET instruction will execute. When the JSET instruction is
executed, the defined time 17:30:00 is stored in the time variable
in D1.
JSETP
-
When the normally open instruction turns ON, the
JSETP instruction will execute. When the JSETP instruction
executes, the defined time 17:30:00 is stored in the time variable
in D1.
|
