32.16.2.1 Calculating the Number of Steps When Setting Operands
- AVE/AVEP
The following describes the specifiable content of operands (S1,
S2, and D1) for the AVE and AVEP instructions.
The actual number of steps in the AVE and AVEP instructions
depends on the specified operand. The following describes how to
calculate the number of steps.
Number of steps in operand S1 + Number of steps in operand S2 +
Number of steps in operand D1 + 1 = Total number of steps in one
instruction
For example, calculating the number of steps
in AVE and AVEP instructions.
(For the number of steps in an operand, refer to the operand
settings as follows.)
{Data_1 [0] = 2 steps} + {10 = 1 step} + {Result [0] = 2 steps}
+ {1 step} = 6 steps One last step is included in the instruction.
Be sure to add that one step.
|
