-
Saves used multilanguage text. From the [Common
Settings (R)] menu, select [Text Registration (T)] or click
. The [New Text/Open]
dialog box appears.
-
Set the text number and comment, then click [New].
The text input screen appears.
For example, Number = "1", Comment = "Set"
-
Select the [Input Multilanguage] check box. The
following message appears. Click [Yes (Y)].
-
The [Language Change] dialog box appears. Select
the [Enable Language Change Feature] check box.
-
In the [Switching Control Address] field, set the address to store the Table Number to
display
-
In the [Initial Table] drop-down list, set the
table to display when the [Switching Control Address] is set to
"0". (Table 1)
-
Select each Table's display language and click
[OK].
For example, Table1= ASCII, Table2= Japanese
-
Enter the text to display for each table.
Text table registration is complete.
-
Next, configure the Message Display settings. Open
the drawing screen. From the [Parts (P)] menu, select [Message
Display (M)] or click 
. Place the Part on the
screen.
-
Double-click the new Message Display. The following
dialog box appears. Click the [Text Display] icon.
-
In the [Specify Text File Number] drop-down box,
select the method of specifying text to display. Set the [Text File
Number].
-
In [Trigger Bit Address], set the address (M100)
which will trigger the text display.
-
Click the [Display] tab. Set the [Display
Characters] and [Display Rows].
-
As needed, set the Message Display color and text
color on the [Color] tab, and click [OK]. The Message Display
settings are complete.
-
Create a switch to change languages. From the
[Parts (P)] menu, point to [Switch Lamp (C)] and select [Word
Switch (W)] or click 
. Place the switch on
the screen.
-
Double-click the placed Switch part. The following
dialog box appears.
-
In [Select Shape], select the Switch shape.
-
In the [Word Address] field, set the same address
(D300) as the set [Switching Control Address].
-
In the [Word Action] drop-down list, select [Write
Data]. Set [Constant] to 1.
-
Specify the color and label for the switch on the
[Color] tab and [Label] tab as required, and click [OK]. The switch
for changing to English text (Table 1) has been created.
-
Create the same kind of Switch to change to
Japanese text (Table 2). The settings for the Switch are as
follows.
