Select the Key Part type.
Set a keypad input key.
Keypad Action
Select the keypad operation, [text], [ENT], [BS], [CLR], [DEL],
[↑], [↓], [←], [→], [Change Keypad], and [Cancel (For Popup
Window)].
[ENT], [BS], [CLR], [DEL], [↑], [↓], [←], [→],
[Change Keypad], [Cancel (For Popup Window)]
Determines the data being inputted.
Erases the character left of the cursor
position.
Clears all the data being inputted.
Erases the character in the cursor
position.
When using multiple Data Displays, the system
can move to the next or previous Data Display without entering
data. This allows you to skip to the Data Display you want to work
with.
* If the [Data Display] dialog box's [Data Entry] option is
[Touch], you have to define the [Designated Input Order].
When the option is [Bit], the [Allow Input Bit Address] needs to be
ON at the same time.
For example, For [↑] Up Arrow action
-
When you enter characters to be converted with
the FEP feature, this key moves the cursor to the top or last of
the characters. When pages of convert- to characters display, it
switches the display to the previous or the next page.
Moves the cursor to the right or left during
input.
For example, For [→] Right Arrow action
Closes a pop-up keyboard and erases all the
inputted characters.
Text
Keypad Action
Text
Set a key to input text. Set up one single-byte or double-byte
character
Change Keypad
Set a key to change keypad screens.
Change- to Number
Set the change- to keypad screen number from 1 to 8999.
FEP Feature Action
Select the FEP feature key action from [FEP Boot/Cancel (Type in
Roman Letters)], [FEP Boot/Cancel (Type in Hiragana)], [Kana
Conversion], [Input Mode Change], or [Cancel (For FEP
Feature)].
FEP Boot/Cancel (Type in Roman Letters), FEP
Boot/Cancel
Boots/cancels the FEP (Type in Roman letters)
each time you touch the keypad.
Boots/cancels the FEP (Type in hiragana
letters) each time you touch the keypad.
FEP Display Position
Select the display position of the Japanese FEP Window from
[Top] or [Bottom].
When [Top] is selected
When [Bottom] is selected
Change Kana, Change Input Mode, Cancel
Changes the character type in the order of
Double-byte Katakana → Single-byte Katakana → Hiragana each time
you touch the keypad after the FEP is started.
Select the input mode from Roman Letters or
Hiragana. Toggles between [Roman Letters] and [Hiragana] each time
you touch the Input Mode Change key for FEP Feature. Combine this
key with the [Change Keypad] key.
-
When you place the [Change Keypad] key on the
[Input Mode Change] key, place them in the order of the [Input Mode
Change] key → [Change Keypad] key. If you place them in the
reversed order, keypads are changed first and input modes will not
be changed.
Cancels the input of characters to be
converted and the display of candidates for conversion.
