-
Normally a pop-up keypad appears to the right of
the data display, starting at the top right corner of the data
display.
-
If there is not enough space to display a keypad
at the right of the screen, the keypad appears to the left of the
data display, starting at the top left corner of the data
display.
-
If there is not enough space to display a keypad
at the right, left, or top of the screen, the keypad appears under
the data display.
-
If there is not enough space to display a keypad
at the bottom of the screen, the keypad appears with its vertical
position adjusted.
-
If there is not enough space to display a keypad
at the right or bottom of the screen, the keypad appears to the
left of the data display with its vertical position adjusted.
-
If there is not enough space to display a keypad
at the right, left, or bottom of the screen, the keypad appears on
the top of the data display.
-
If there is insufficient space to display the
keypad in all directions, the keypad will display at the bottom
right of the screen. In this case, the keypad may display overtop
the data display area and hide inputs.
-
Even if you rotate a Data Display, the pop-up
keypad will not always display with the exact same rotation.
-
A special window or a local window is used to
display a pop-up keypad. If the maximum number of windows already
display, the File Manager does not appear. Close another window to
display the pop-up keypad.
12.9 Displaying
Multiple Windows on a Single Screen
-
You cannot input from a popup keypad into a Data
Display placed on a Window. to input data into a Data Display on a
Window, directly place the keypad in the Window.
-
If another window overrides the pop-up keypad,
you can switch to the keypad display by touch.
-
If the display entered interlock mode during data
input, the pop-up keypad remains open and allows input. The next
time you touch the data display, the pop-up keypad is interlocked
and will not display. Touch the [Cancel] key to exit the pop-up
keypad without inputting data. Touching the data display does not
close the keypad.
-
You cannot set a display color, display position,
font, or text size for the inputting display when you input numeric
values or text and the alarm value display.
