Open a drawing screen where you want to place a
keypad.
From the [Part (P)] menu, select [Keypad (B)] or
click to display the
[Package].
Select a keypad to use and place it on the drawing
screen. For example, DEC keypad
The steps to display a permanent keypad on the screen are
complete.
Next, set up a Data Display part used to display
data entered with the keypad.
Double-click the Data Display to open the [Settings] dialog box
Select the [Allow Input] check box. The [Data
Entry] tab becomes available.
Click the [Data Entry] tab and clear the [Enable
Popup Keypad] check box.
Now the Data Display is set up to display data that has been
entered using the screen keypad.