-
The function key cannot be registered in a
Package.
-
The preview screen does not display function
keys.
-
Function keys do not display in the [Properties]
window.
-
If you change the display unit, all the functions
added to switches are copied.
-
There is no limit to the number of parts you can
set up on a local function key. There is a limit of 384 parts you
can add to a single Hand-held GP screen, which includes function
keys. You cannot add more than the maximum 1152 registers to read
per screen.
-
You can add the maximum 384 parts to each global
function key. You can also add to each function key up to 1152
registers to read.
-
The operation switch is not available during
simulation.
-
In the [Display Unit] page's [Operation] tab, if
[Touch Panel Detection] is set to [OFF Detect], parts set up on the
operation switch will not work.
-
When operations are prohibited due to the
Operation Lock, function key inputs are not accepted.
-
The following features do not run in
simulation.
-
Operation tab's [Operation Switch] setting
(In simulation, [Operation Switch] is always set to [Disable].)
-
Conversion adapter functions
(DOUT, external buzzer, unit Number)
-
Function keys are not available on Window
screens.
-
When a communication error occurs due to noise
between the Hand-held GP and conversion adapter, you may not be
able to turn ON/OFF the buzzer or DOUT.
