Select the Channel to configure the graph display and color.
Line Type
Specify whether to draw a line on the graph.
When checked, set one of the following types for the line.
Click the icon
to display the
structure of addresses in use.
For Display Color / Background Color, refer to the Color Code
Table.
8.16 Color Code Table
Pixel Size
Specify whether to show the points on the graph.
When checked, select a dot type from among the 7
patterns:
,
,
,
,
,
,
The dot size is fixed at 5
pixels.
Display Color
Set the dot color.
Curve
Specify whether to curve the line within the display range when
the data values exceeded the specified value of the display
range.
When [Curved Lines] is selected, values that exceed the display
range display as the preset upper limit. When both X and Y values
exceed the display range, dislays the intersecting point between
upper limits.
When [Straight Lines] is selected, does not display values that
exceed the display range.
Connect the start and end points
Specify whether to connect the start and end points of the graph
to create a closed line.
Select a color for the Graph Display Area.
Select the blink and blink speed. You can choose different blink
settings for [Display Color], [Background Color], and [Graph Area
Color].