Set the number of ranges the graph display is divided into, from
1 to 16.
If [Ranges] is more than "2", select the method to specify the
minimum and maximum for each range. If [Ranges] is "1", fixed to
[Constant].
Specify a set constant as the Min/Max.
Specify the address where the Min/Max values
are stored.
Range Number
Select the set range for Min. and Max and color within the range
specified in [Ranges]. You can select by clicking the range you
want to specify on the graph display sample.
Displayed in the format of [(Min) <= Range No <=
(Max)].
Min./Max.
Set the Min. and Max. value range for the [Range Number], as a
percentage of 0 to 100 (if [Display Sign +/-] is selected, the
range is from -100 to 100). If [Specify Range] is [Constant], set a
min value and max value. If [Address] is set, specify the word
address where the min/max value will be stored.
Default sets the Min. and Max. values to equalize each
range.
Color Specification
Select the designation method of the display color and pattern
for the range selected with [Range Number]. If the [Ranges] is 2 or
greater or [Color Stack] is set, this will be fixed as
[Direct].
Individually designate the display color and
pattern.
Set the address which will store the color
code and pattern code.
19.2.2 Changing the
Graph Color from a Device/PLC
Color Stack
Specify whether each range is color-coded when displayed. This
can only be set if the [Ranges] is "2" or more.
Ranges = 2
