Display Direction
Select the graph display direction.
Data Samples
Set the number of sets of data samples to display on a single
line. The range depends on the set model's Display Number of
Dots.
|
Display Number of Dots
|
Data Samples
|
|
320 x 240 dots (QVGA)
|
0 to 319
|
|
640 x 480 dots (VGA)
|
0 to 639
|
|
800 x 600 dots (SVGA)
|
0 to 799
|
|
1024 x 768 dots (XGA)
|
0 to 799
|
-
When [Fill Below Line] is set, the maximum
number of [Data Samples] is 97.
-
Set the Data Samples with a number smaller than
the number of [Occurrences] in the Sampling settings.
Samples to Scroll
Select the number of sets of data to remove when the graph fills
the Display Area. This can only be set when the Graph Type is
[Normal]. Set this within the range specified by [Data
Samples].
Scale Divisions
Vertical Major Scale/Minor Scale
Set whether to display the major and minor scale on the trend
graph's Y-axis. If so, choose the number of divisions. The number
of divisions can be set from 1 to 638 for Major Scale, and from 2
to 638 for Minor Scale.
Horizontal Major Scale/Minor Scale
Set whether to display the major and minor scale of horizontal
axis on the trend graph's Y-axis. If so, choose the number of
divisions. The number of divisions can be set from 1 to 638 for
Major Scale, and from 2 to 638 for Minor Scale.
Channel Number
Select the Channel to configure the graph display condition.
Display Condition
Select the graph display condition.
Always displays the graph.
Displays the graph when [Display ON/OFF
Address] is OFF an hides the graph when [Display ON/OFF Address] is
ON.
Displays the graph when [Display ON/OFF
Address] is ON an hides the graph when [Display ON/OFF Address] is
OFF.
Display ON/OFF Address
Set the bit address to turn ON/OFF the graph display.
