Define the [Input/Display] for all the channels as a whole or
separately.
Display Method
Select the setting method for the graph display range from
[Specify Range] and [Show Scale].
When [Show Scale] is selected, the [Fill Below
Line] option in the [Color] tab's [Extended] settings cannot be
selected.
When [Show Scale] is selected, the [Alarm
Settings] tab is not displayed.
When [Specify Range] is selected, the
[Auxiliary Line] tab is not displayed.
Bit Length
When you select [Specify Range] in [Display Method] and [Data
Type] is set to [16 Bit Bin], set the data's enabled bit length of
the graph diaplay from 1 to 16.
When the bit length is set to 1 and the bit
status becomes "1", the value of graph becomes "1" only when the
Input Sign is set to [None]. When [2's Complement] or [MSB Sign] is
set, the value is always "0".
Constant/Address
When the [Display Method] is set to [Show Scale], select the
method for setting the scale's upper and lower values as either
numerical values or address values. Data outside the scale's
display range will not show in the graph.
Constant
The setting range differs, depending on the
[Data Type] and [Sign +/-] settings.
Data Type
Lower Limit
Upper Limit
16 Bit Bin
Sign Check Disabled
0 to 65534
0 to 65535
32 Bit Bin
Sign Check Enabled
-32768 to 32766
-32767 to 32767
16 Bit Bin
Sign Check Disabled
0 to 4294967294
1 to 4294967295
32 Bit Bin
Sign Check Enabled
-2147483648 to 2147483646
-2147483647 to 2147483647
Address
Set the Word Address.
The grapph display is updated when the value of address is
changed.
