When [Show Scale] is selected for [Display
Method] in the [Graph] tab, the [Alarm Settings] tab is not
displayed.
Channel Number
Select the Channel to configure.
Alarm
If set, the displayed color changes when the value moves outside
of a specified range.
Upper Limit/ Lower Limit
Set the upper and lower limits for the Alarm Range from 0 to 100
(when [Display Sign +/-] is selected, from -100 to 100). If [Alarm Action] is [Constant], enter an
upper/lower limit value. If [Address] is set, specify the Word
Address where the upper/lower limit value is stored.
Display Color
Select the needle color displaying the alarm.
Blink
Select whether the [Display Color] blinks when the alarm appears
and the blink speed.
There are cases where you can or cannot set
Blink depending on the Display Unit and [Display] tab's [Display
Settings] area. 8.3.1 Setting Colors
Color Range Display Bar
Displays a sample of how the color in each range appears. Any
alarm ranges specified in [Alarm] are also displayed.
