Select the auxiliary line to set.
Defines whether to draw the [Upper Limit], [Standard], and
[Lower Limit] auxiliary lines in the selected positions.
Specify Display Position
Select the designation method of the auxiliary lines' display
position from [Constant] or [Address].
Specify a set constant as the Display
Position.
Specify the address where the Display
Position is stored.
Display Position
Set the auxiliary line's Display Position.
The setting range for each auxiliary line on the Y-axis is as
follows.
|
Data Type
|
Display Sign +/-
|
Setting Range
|
|
16 Bit Bin
|
Cleared
|
0 to 65535
|
|
Selected
|
-32768 to 32767
|
|
32 Bit Bin
|
Cleared
|
0 to 4294967295
|
|
Selected
|
-2147483648 to 2147483647
|
Set each horizontal auxiliary line from 0 to 1000. 500 is the
middle position, 1000 is the largest position.
Line Type
Select the auxiliary line type:
Line Thickness
Set the auxiliary line thickness from 1 to 2.
Display Color
Set the auxiliary line color.
Background Color
If you selected a line type other than a solid line, set the
auxiliary line's background color.
Blink
Select the blink and blink speed. You can choose different blink
settings for the [Display Color], and [Background Color].
