For details about placing parts or setting
addresses, shapes, or colors, please refer to the "Part Editing
Procedure". 8.7.1 Editing Parts
Show/hide the Channel No.2 graph by touching the switch.
From the [Parts (P)] menu, select [Historical Trend
Graph (H)] or click . Place the Graph on
the screen.
Double-click the new Graph. The settings dialog box
appears.
Set the sampling group and address, then adjust
settings such as line color, number of display data, and so on.
In [Number of Channels] from [Channel Settings],
set the number of sets of data lines to display on the graph (2).
Apply the same settings on the graph to be displayed using [Channel
No.2]. 19.4.1 Procedure - Using Trend
Graphs
Configure the Channel No. for the graph you want to
show/hide. Click the [Display Area] tab and select "2" from
[Channel No].
Changing [Channel No] will change the setting
items on the other tabs for the selected [Channel No].
From [Display Condition], choose [Display When Bit
OFF].
In [Display ON/OFF Address], select the address
(for example, M100) for changing the show/hide status of the graph,
and click [OK].
Place a switch to change the show/hide status of
the Channel No. 2 graph.
On the [Parts (P)] menu, point to [Switch Lamp], and select [Bit
Switch (B)], or click to place a switch on
the screen.
Double-click the switch. The following dialog box
appears.
In the [Bit Address] list, select the (M100) address for changing
the show/hide status of the graph and select [Bit Invert] in the
[Bit Action] list.
As needed, set the color and display text on the
[Color] tab and [Label] tab, and click [OK].
Depending on the shape, you may not be able to
change the color.
When you select a switch and press the [F2]
key, you can directly edit the text on the label. When [Text Table]
is selected, you can change the current Text Table.