For details about placing parts or setting
addresses, shapes, or colors, please refer to the "Part Editing
Procedure". 8.7.1 Editing Parts
The sampled values of two word addresses (D100/D101) are
displayed as one point on the graph's x/y-axis.
On the [Parts (P)] menu, point to [XY Scatter
Graph (Y)] and select [XY Historical Scatter Graph (X)] or click
to place it on the
screen.
Double-click the new Graph. The following dialog
box appears.
In [Group Number], select the number of the
sampling group you want to display.
Click [Channel Settings]. The following dialog box
appears.
In [Number of Channels], set the number of sets of data lines to
display on the graph (1). In [Channel Number 1], select [X
Coordinate Address] (for example, D100) and [Y Coordinate Address]
(for example, D101).
Set the data type and input range (Min/Max) for
the graph data.
On the [Display/Color] tab, set the type and color
of the line/point of the graph to be displayed and the color of the
Graph Display Area. When you display the graph with only points,
check [Dot Type] and clear the [Line Type] check box.
Click [Extended] in the [Graph] tab, and select
[Show Scale] for [Display Method]. The [Auxiliary Line] tab and
[Normalize] tab are displayed.
Set normalization in the [Normalize] tab.
Select the [Normalize] check box.
Set the addresses for [Control Word Address], [X Coordinate Data
Start Address] and [Y Coordinate Data Start Address]. In [Display
Settings], set the type, color, and so on, of the lines and points
for the normalized data.
Configure x-axis and y-axis in the [Scale]
tab.
Check [X-Axis] and [Y-Axis], and set the number of divisions, type,
display color and blink.
Set the auxiliary line in the [Auxiliary Line] tab
as necessary and click [OK].
to place it on the
screen.
