For details about placing parts or setting
addresses, shapes, or colors, please refer to the "Part Editing
Procedure". 8.7.1 Editing Parts
Displays word address (D100) data on a Bar Graph.
From the [Parts (P)] menu, select [Graph (G)] or
click . Place the Graph on
the screen.
Double-click the new Graph. The following dialog
box appears.
In [Monitor Word Address], set the address (D100)
you want to display. Then set the [Data Type] and [Bit Length].
In the [Input Specification] drop-down list, select
[Constant]. In the [Min] and [Max] fields, set the range of data
stored in that address. If you are storing negative values, set the
[Input Sign] to [2's Complement] or [MSB Sign].
In the [Graph Shape] drop-down list, select [Bar
Graph].
You can also select [Circle Graph], [Semicircle
Graph], and [Tank Graph].
In [Select Shape], select the Graph shape.
On the [Color] tab, set the [Display Color].
Set the Graph's other colors (pattern color, border color) if
necessary.
On the [Scale] tab, set the scale's display
settings, designate the scale colors, and click [OK].
For graph parts with a scale, Scale Label for
the major scale can be automatically placed using a text part.
Right-click the graph part with a scale and click [Scale Label
Placement]. The [Text] dialog box appears. Set up each item and
click [OK].
. Place the Graph on
the screen.
