Display Method
Set the method of displaying a file saved in a CF card.
Specify File Name
Specifies the file name of an image file (BMP or JPEG converted
file) or a JPEG file stored in a CF card and displays the
image.
Specification Method
Set the method of specifying a file saved in a CF card.
Trigger Bit Address
Set the bit address which controls the image display.
Trigger Method
Set whether to display an image with the bit address ON or
OFF.
Clear Color
Set the color when there is no image display.
Blink
Select the blink and blink speed.
Display Screen Specification Address
Set the address which specifies the image file to display.
-
Specify the data to store with a full path
(folder name and file name). The full path should be 20 single-byte
characters (10 words) or less. If it is less than 20 characters, be
sure to store "00h" at the end.
-
Put "\" between the folder name and file name
in a full path.
-
The file name should be 8 single-byte
characters or less. Only Bin and JPEG files are supported.
-
Only display unit internal addresses (LS or
USR) can be set in the [Display Screen Specification Address].
When you specify LS area, Text Data Mode only supports 1, 2, 4, and
5.
When specifying the USR area, the text data storage order is fixed
to L/H, no matter the value of the [Text Data Mode] property.
7.8.1 System Settings
[Device/PLC] Settings Guide
For example, displaying an image file (LOGO.bin) in the
[DATA] folder in a CF
card (Display Screen Specification Address=LS1000)
JPG File (*.jpg)
Select this when you display a JPG file.
Image CF (*.bin)
Select this option when you specify an image file (*.bin) saved
in a CF Card Folder or a CF card.
