-
Acknowledge the registered external character
after the screen data transmission on the display unit. The text
corresponding to the input text code displays on GP-Pro EX.
-
External characters can be registered only when
the English standard font with a font size of 8 x 16 pixel or
larger is selected. 8 x 8 pixel is not supported.
-
To create an external character, draw it with
single-byte characters (within 8 x 16 dot) with reference to the
origin of the mark creating area (0, 0).
-
External characters cannot be rotated.
-
When you print text in Alarm, external characters
are not outputted. The results, depending on printer types, are as
follows:
-
For NEC PR201, EPSON ESC/P, HP Laser Jet, and
Text ASCII:
Direct code output of the text codes
-
For EPSON PM/Stylus:
Image output of Code Page 850 characters
-
If you were using the Character code (0x80 to
0xFF) of the Western standard fonts in a CSV file while registering
external marks, and you want to display the marks in the Special
Data Display [CSV Display] and [CSV Data Transmission] on the
display unit, they will be converted to the external characters
that were registered in the mark screen.
