Draw a circle or oval by dragging the mouse to specify the
center point and one point on the circle.
From the [Draw (D)] menu, select [Circle/Oval (C)] or click
to place a circle/oval
on the screen. Double-click the placed [Circle/Oval] to display the
following dialog box.
If you press and hold the [Shift] key while
placing an object, you can draw a circle.
If you place a circle/oval while pressing the
[Ctrl] key, you can draw a circle/oval spreading out from the
center.If you place a circle/oval while pressing the [Ctrl] and
[Shift] keys at the same time, you can draw a circle spreading out
from the center.
Border
Line Type
Select the line type from [Solid Line], [Dotted Line], [Dash
Line], [Chain Line], or [Two-Dot Chain Line].
Set the width of the circle/oval and the shadow within the range
of 1 to 16.
You can set the width and height of a
circle/oval in [Properties (P)]. However, if you set the width or
height to an even number, it will be drawn with one less dot on the
display unit.
to place a circle/oval
on the screen. Double-click the placed [Circle/Oval] to display the
following dialog box.
