The file name of original part being created is
"*.bdx".
If you are using the version of GP-Pro EX V2.50
or later, original parts created in V2.50 or earlier are read only
and cannot be edited.
You can use the [Parts Toolbox] ON/OFF options
to view Switches, Lamps, and Key parts in [State 0] (OFF) and
[State 1] (ON).
To select the registered image for the part,
open the Parts dialog box and click [Select Shape]. In the [Shape
Browser] dialog box, select the registered part image from [Select
Shape]. Select the appropriate image and click [OK].
If you click [Create] while a previously
registered part is selected, you can edit that part image. to
create a new image, click [Create] while no previously registered
part is selected.
Image parts can be registered with a maximum
size of 160 x 160 pixels.
Parts which use registered images can cause
large project file sizes. In the [Color] settings, select the
[Compress] check box to manage the project size.
You can register up to 200 image parts in a
single parts palette file.
You can register parts that are used often in a
package.
8.10 Repeatedly Use Parts and
Drawings (Package)
Image parts that have been enlarged or reduced
may display differently on the display unit and in GP-Pro-EX.
When the registered image size is different
depending on the state, the larger image will remain the same, and
the smaller image will be enlarged.
You cannot register or delete a
previously-prepared PDX file.
The types of image file that can be registered
to a part are BMP, JPEG, DPD, and PNG.
