You can specify the vertical and horizontal dimensions of a character in bitmap fonts. When you magnify/shrink characters, the outline may become rough or the letter may appear compressed.

Stroke Font

This is an outline font where the ratio of the character height/width is fixed. The letters will have a smooth outline even if you magnify/shrink them. However, this font uses more disk space on the display unit.

Size

Choose a font size for the text.

Standard Font

(8 to 64)×(8 to 128)

Standard Font (Fixed Size)

Choose from [6x10], [8x13], or [13x23] (Displays single-byte characters only)

Stroke Font

6 to 127

Display Language

Select the display language: [Japanese], [ASCII], [Chinese (Simplified)], [Chinese (Traditional)], [Korean], [Cyrillic], or [Thai].

This setting is disabled when, in the [System Settings] [Display Unit] link's [Display] tab, you select the [Synchronize Text Display language with Text Table] check box. The language will change to correspond with the language setting of the Text Table, you do not need to set the [Display Language].

Text Attributes

Select the text attributes.

Standard Font

Choose from [Standard], [Bold], [Shadow] (When using the fixed font size [6x10], select either [Standard] or [Shadow].)

Stroke Font

Choose from [Standard], [Bold], [Outline]

Image Font

Window font will be converted to bitmap images and displayed on a display unit.

Select Font

Select the font and define [Style], [Size], and [Font Set]. Depending on the font you selected, available [Style], [Size], and [Font Set] will differ.

A proportional font cannot be selected.
For Text Display parts, single-byte alphabetical characters will be automatically registered as text. If you want to display other characters, click [Character Registration] to add characters.
If unregistered character is entered, it will not be displayed correctly.

Display Language

Select the display language: [Japanese], [ASCII], [Chinese (Simplified)], [Chinese (Traditional)], [Korean], [Cyrillic], or [Thai].

From the [System Settings] window, [Display Unit] page, [Display] tab, when the [Synchronize Text Display language with Text Table] check box is selected, Image Fonts may not display correctly on the display unit.

Display Characters

Set the number of characters to be displayed from 1 to 100.

Fixed Position

Set whether the text will be fixed in the center of the Part.

Display Style

Select the alignment of the text display area's text: [Align Right], [Align Left], or [Align Center].

Hide Input Value (Show asterisks)

Set whether Input Values will be indicated by asterisks.

"*" represents a single-byte character and "**" represents a double-byte character.
However, when using Image Fonts, unregistered doble-byte character will be shown as "*".

Character Registration

In [System Settings], click [Font]. Register text to be displayed in the Text Display from the [Image Font] area's [Character Registration] button.

6.5 Font Settings Guide

When [Image Font] is selected, this setting is available.
The Text Display's dialog box will close.

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)