Set the Statistical Data Display's font and attributes.
Font
Set a font for the text.
Font Type
Select a font type for the statistical data from [Standard
Font], [Stroke Font], [Image Font], or [Bitmap Font].
Stroke Font and Standard Font
You can specify the vertical and horizontal dimensions of a
character in bitmap fonts. When you magnify/shrink characters, the
outline may become rough or the letter may appear compressed.
This is an outline font where the ratio of the character
height/width is fixed. The letters will have a smooth outline even
if you magnify/shrink them. However, this font uses more disk space
on the display unit.
Size
Choose a font size for the statistical data.
(8 to 64)×(8 to 128)
Choose from [6x10], [8x13], or [13x23]
(Displays single-byte characters only)
6 to 127
Text Attributes
Select the text attributes.
Choose from [Standard], [Bold], [Shadow]
(When using the fixed font size [6x10], select either [Standard] or
[Shadow].)
Choose from [Standard], [Bold], [Outline]
Image Font
Window font will be converted to bitmap images and displayed on
a display unit.
-
When Image Font is selected, text for the
Statistical Data Display Part is automatically registered. Once
registered, you can check the content in the [Select Font]
field.
-
A proportional font cannot be selected in the
Statistical Data Display Part.
Select Font
The [Image Font] dialog box appears. Select the
font, style, and size, and Character Set.
Bitmap Font
You can use prepared bitmap images to uniquely express numeric
values and symbols.
Model
Select the model to use from the registered bitmap font
models.
Color
Set a color for the bitmap font.
Font Size
Set the Bitmap font width between 1 to
200.
Set the Bitmap font height between 1 to
400.
Transparent
Set whether the background of the bitmap font will be
transparent.
Settings
Preview all characters, such as numeric values and symbols, of
the selected model.
Display Format
There are three ways to display statistical data: [Percentage],
[Numeric Value], and [Numeric Value + Percentage].
-
When [Percentage] has been selected, the
division operation may create results that, when totaled, do not
add up to exactly 100%.
Total Display Digits
If the [Display Format] is set to [Numeric Value] or [Percentage
+ Value], set the digits to be displayed in the Statistical Data
Display. Numbers after the decimal point are included in the
display digits. However, the decimal point is not included in the
display digits.
Specify Decimal Places
Select the designation method for specifying the Decimal Places.
This setting is available when the [Data Type] is [Bin] or
[Float].
Specify a fixed value for the Decimal Places.
(Direct Specification)
Specify the address where the Decimal Places
are stored. (Indirect Specification)
Decimal Places
When [Specify Decimal Places] is [constant], select the number
of digits after the decimal point.
When the Total Display Digits is 5, and the Number of Decimal
Places is 2, it will look as follows:
The number of decimal places you can set up depends on the [Data
Type].
|
Data Length
|
Data Type
|
Total Display Digits
|
Decimal Places
|
|
16 bit
|
Bin
|
1 to 11
|
1 to 10
|
|
BCD
|
—
|
|
32 bit
|
Bin
|
1 to 11
|
1 to 10
|
|
BCD
|
—
|
|
Float
|
1 to 17
|
1 to 16
|
Number of Decimal Places Address
When the [Decimal Places Specification] is [Address], specify
the Address where Decimal Places are stored.
Display Style
There are three ways of positioning statistical data: [Align
Right], [Align Left], and [Align Center].
Zero Suppress
If this option is selected, leading zeros are not displayed.
For example, Number of Display Digits = 4
7-segment Display
Select this option to show values as a 7-segment display.
-
This cannot be set when [Bitmap Font] and
[Image Font] is selected.
-
This can be set only when [Text Attribute] is
selected as [Standard].
-
This option is not available when a [Fixed
Size] is selected in the font [Size] list.
Auto-size Font
For use with the Stroke Font, select this option to display the
value without the top and bottom margins.
-
This cannot be set when [Standard Font],
[Bitmap Font], or [Image Font] is selected.
-
This setting is unavailable for [7-segment
Display].
Preview
Displays the data image according to the settings.
