Specify an input/display range and [Monitor Word Address] data will automatically convert to correspond with the input and display range. The resulting numeric values can display.

Data Type

Select the type of data to be displayed.

Bit Length	Data Type
16 bit	Dec, Hex, Oct, Bin, BCD
32 bit	Dec, Hex, Bin, BCD, Float

When using 32-bit data, the relationship of high/low order for word data depends on the the device/PLC type. For more information, refer to your device/PLC manual.
The Float format is IEEE754.

Sign +/-

Defines negative number support for display data. Set up when you want to display negative values. Negative values are handled using 2's Complement.

This can only be set when the [Data Type] is [Dec].

Round Off

Sets whether to round off fractional values in the display data. Fractions will be discarded if rounding off is not selected.

This setting is available when [Data Type] is [Float].

Get Operation Log

Specifies whether to record the Operation Log. Can be specified only when [Allow Input] is selected.

When [Enable Operation Log Function] is not selected in the common settings [Operation Log Settings], the message "Unable to include in operation log of individual parts" will appear. Select [Enable Operation Log Function] to enable the operation log settings.

Display numeric data as relative values.

Specify Input/Display Range

Specify an input/display range and [Monitor Word Address] data will automatically convert to correspond with the input and display range. The resulting numeric values can display. (Display relative values)

For example:

Data Type

Select the type of data to be displayed.

Bit Length	Data Type
16 bit	Dec, Hex, Oct, Bin, BCD
32 bit	Dec, Hex, Bin, BCD, Float

Bit Length

Specify the address' valid bit length from 1 to 16.

Selectable only when [Data Type] is specified as [16 Bits].

Input Range

Input Specification

Choose how to specify the maximum and minimum values.

Constant

Specify a set constant as the Min/Max. (Direct Specification)

Address

Specify the address where the Min/Max values are stored. (Indirect Specification)

Sign +/-

Specifies whether input data will be able to handle negative numeric data.

None

Only positive numeric data.

2's Complement

Negative numbers are handled with 2's complement.

MSB Sign

Negative numbers are handled with MSB sign.

Display Range

Display Specification

Choose how the max and min values of the display range will be specified.

Constant

Specify a set constant as the Min/Max. (Direct Specification)

Address

Specify the address where the Min/Max values are stored. (Indirect Specification)

Round Off

When displaying data, select whether fractions get rounded off or truncated.

Display Sign +/-

Set to display negative numbers.

This can be set when the [Data Type] is [Dec].

Example: When writing "-123"

Input Range/Display Range

Min. Value/Max. Value

Select the input range and display range for the numeric display data.

If [Input Specification] or [Display Specification] is [Constant], you can input a min/max value.

If [Address] is set, specify the word address where the min/max value will be stored.

Input Range/Display Range Min. Value/Max. Value

16 bit

Data Type	Sign +/-	Input Range	Display Sign +/-	Display Range
Dec	None	0 to 65535	Disable	0 to 65535
	None	0 to 65535	Enable	-32768 to 32767
	2's Complement	-32768 to 32767	Disable	0 to 65535
	2's Complement	-32768 to 32767	Enable	-32768 to 32767
	MSB Sign	-32767 to 32767	Disable	0 to 65535
	MSB Sign	-32767 to 32767	Enable	-32768 to 32767
Hex	None	0 to 65535	—	0 to FFFF(h)
	2's Complement	-32768 to 32767	—	0 to FFFF(h)
	MSB Sign	-32767 to 32767	—	0 to FFFF(h)
Oct	None	0 to 65535	—	0 to 177777(o)
	2's Complement	-32768 to 32767	—	0 to 177777(o)
	2's Complement	-32767 to 32767	—	0 to 177777(o)
BCD	—	0 to 9999	—	0 to 9999
Bin	None	0 to 65535	—	0 to FFFF(h)
	2's Complement	-32768 to 32767	—	0 to FFFF(h)
	MSB Sign	-32767 to 32767	—	0 to FFFF(h)

32 bit

Data Type	Sign +/-	Input Range	Display Sign +/-	Display Range
Dec	None	0 to 4294967295	Disable	0 to 4294967295
	None	0 to 4294967295	Enable	-2147483647 to 2147483647
	2's Complement	-2147483648 to 2147483647	Disable	0 to 4294967295
	2's Complement	-2147483648 to 2147483647	Enable	-2147483647 to 2147483647
	MSB Sign	-2147483647 to 2147483647	Disable	0 to 4294967295
	MSB Sign	-2147483647 to 2147483647	Enable	-2147483647 to 2147483647
Hex	None	0 to 4294967295	—	0 to FFFFFFFF(h)
	2's Complement	-2147483648 to 2147483647	—	0 to FFFFFFFF(h)
	MSB Sign	-2147483647 to 2147483647	—	0 to FFFFFFFF(h)
BCD	—	0 to 99999999	—	0 to 99999999
Bin	None	0 to 4294967295	—	0 to FFFFFFFF(h)
	2's Complement	-2147483648 to 2147483647	—	0 to FFFFFFFF(h)
	MSB Sign	-2147483647 to 2147483647	—	0 to FFFFFFFF(h)
Float	—	-9.9e¹⁶ to 9.9e¹⁶	—	-9.9e¹⁶ to 9.9e¹⁶

The Input Range and Display Range define how to convert values for display. If the value is outside the input range, the value is converted and displayed using the same ratio.

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)