Depending on the driver, the address display
range and actual address range may be different.
As a result, a portion of the addresses may not appear in the
address map.
Displays the list of the addresses specified in a project file
with a map.
Click [Address] in the Work Space.
If the [Address] tab is not displayed in the
Work Space, from the [View (V)] menu, point to [Work Space (W)] and
select [Address (A)].
The following [Address] dialog box appears.
Select the target to display from [Device Address]
or [Symbol Variable].
In the [Type] drop-down list, select the address
type from [Bit Address] or [Word Address].
Select the address of the target to display. (For
example, M10)
You can verify which addresses are used on the
address map.
