Bit ON
Executes the action designated in [Mode] when the [Trigger Bit
Address] changes from OFF→ON.
Trigger Bit Address
Select the bit address that triggers the drawing of the
image.
Data Storage Start Address
Stores the image and properties as graphical data in a Word
address.
Set this Word address' start address.
40.5.3 [Draw Action] Details
Words to Read
Specify the draw data words from 5 to 7.
Clear Trigger Bit Address
Set a trigger bit to clear the drawn image. When the clearing
bit turns ON, a Clearing Screen will overwrite the displayed
screen.
Clear Screen
Designate a Base screen to clear the drawn image.
A Clearing Screen must first exist in the project.
Call Position of Screen to Clear
Designate the Clearing Screen's call position using an X
coordinate and a Y coordinate.
Read After Startup
Reads the draw data when the conditions in [Trigger Settings]
are satisfied.
