From the [System Settings] window, click [Display
Unit] and open the [Extended Settings] tab.
In [Operation Lock], select the [Enable Operation
Lock] and [Lock Screen Touch] check boxes.
Set the number of seconds until the lock is
automatically unlocked when there is no new touch operation in the
unlocked display unit in [Timeout].
Place [Operation Lock Switch]
Touching the Operation Lock Switch sets and releases the
Operation Lock.
Touch the Operation Lock Switch to unlock the display unit for
operations, and lock out all other display units. to release the
lock, touch the Unlock Switch on the display unit.
For details on how to draw parts, and defining
the address, shape, color, and labels, refer to the following. 8.7.1 Editing Parts
From the [System Settings] window, click [Display
Unit] and open the [Extended Settings] tab.
In [Operation Lock], select the [Enable Operation
Lock] check box.
In [Timeout], set the number of seconds until the
lock is automatically released when there is no new touch
operations on the unlocked display unit.
From the [Parts (P)] menu, point to [Switch/Lamp
(C)] and select [Special Switch (P)], or click , and place the Switch
on the screen.
Double-click the placed Switch part. The following
dialog box appears.
In [Select Shape], select the Switch shape.
In [Special Action], select [Operation Lock], and
in [Action], select the switch type that you want to set.
Select the [Do Not Automatically Unlock] check
box, and the lock will not be unlocked even if the time set in
[Timeout] has passed. to release, set [Action] to [Lock and
Unlock], or place a Special Switch for the [Unlock] operation.
As needed, set the color and display text on the
[Color] tab and [Label] tab, and click [OK].
Depending on the shape, you may not be able to
change the color.
When you select a switch and press the [F2]
key, you can directly edit the text on the label.