Configure settings to change a Base or Window Screen into a Sub
Screen, or to use a Picture Display or a Message Display to display
a sub screen on a Base or Window Screen.
Enable the Sub Display
Select whether or not to use a Sub Display.
Sub Display Type
Select the Sub Display Type.
Change the display to other screen, or
display pictures or text on a base screen.
Display a Sub Screen in a Window. Change the
window to another one, or display a picture or text in the
Window.
Mode
Select the Sub Display action type.
When [Base Screen] is selected for
[Sub Display]
Change the Base Screen to display the sub
screen.
Use a Picture Display to display the sub
screen.
Use a Message Display to display the sub
screen.
When [Window] is selected for [Sub
Display]
Change the Window Screen to display the sub
screen.
Use a Picture Display on the Window Screen to
show the sub display.
Use a Message Display on the Window Screen to
display the sub screen.
[Base Screen] - [Screen Change]
This setting changes the entire screen to another screen. It
works the same as a normal screen change.
Start Screen Number
Set the Base Screen Start Number to display a sub screen. Select
the method to designate the screen Number from [Constant] or
[Address].
Designate a set constant as the Base Screen
Start Number. The setting range is from 1 to 9999.
Select a word address that stores the Base
Screen Start Number
[Base Screen] - [Change Picture Display]
Display a picture corresponding to the Alarm Message in the
Picture Display placed on the same screen as the Text Alarm
Part.
Start Screen Number
Set the start number of the
Base Screen for the sub display in the Picture Display
Select the method to designate the screen Number from [Constant]
or [Address].
Designate a set constant as the start Number
of the screen used for picture display. The setting range is from 1
to 9999.
Select a word address that stores the start
Number of the screen used for picture display.
Picture Display Word Address
Set a word address to store the screen Number of the screen
displayed in a Picture Display.
Set the same address as the [Word Address] of the Picture
Display placed on the same screen as the Text Alarm Part.
-
With [State Display] selected, in [Screens of
Type] select [Base Screen], in [Specify Screen] select [Address],
and in [Data Type] select [Bin].
[Base Screen] - [Text Display Change]
Display a text corresponding to the Alarm Message in the Message
Display placed on the same screen as the Text Alarm Part.
Start Screen Number
Sets up the start number for
the sub display's text that will appear in the "Message
Display".
Select the method to designate the text Number from [Constant]
or [Address].
Designate a set constant as the Text's Start
Number. The setting range is from 1 to 8999.
Select a word address that stores the Text's
Start Number.
Text Display Word Address
Set a Word Address to store the Text File Number of the text
displayed in a Message Display.
Set the same address as the [Text File Number Word Address] of
the Message Display placed on the same screen as the Text Alarm
Part.
[Window Screen] - [Window Change]
Displays the Window Screen which corresponds to the Alarm
Message.
Start Screen Number
Defines the sub display window
screen start number
Select the method to designate the Window Screen from [Constant]
or [Address].
Designate a set constant as the start Number
of the Window Screen used for a Sub Display. The setting range is
from 1 to 2000.
Select the word address that stores the start
number of the sub display window screen.
Window Settings
Configure the Window settings.
Local/Global
Defines whether to use a local window or global window
for the Sub-Display.
-
Using a global window for the Sub-Display,
refer to 12.6.1 Procedure
- Changing the Window on All Screens. On the [System Settings]
window, select [Display Unit]. In the [Action] tab, set [Global
Window Operation] to [Indirect], and [Data Type] to [Bin]. Use LS16
to display or erase the Window.
Window Control Address
To use a local window for a Sub Display, designate the address
used to control the window display. Four consecutive words will be
used, starting from the designated address.
Set the same address as the [Window Control Address] of the
Window Part placed on the same screen as the Text Alarm Part.
12.7.2 Window - Word Action /
Basic
[Window Screen] - [Change Picture Display]
Display a picture corresponding to the Alarm Message in the
Picture Display placed on the Window Screen.
Start Screen Number
Set the Base Screen Start Number to display a sub screen for a
Picture Display on the Window Screen. Select the method to
designate the screen Number from [Constant] or [Address].
Designate a set constant as the start Number
of the screen used for picture display. The setting range is from 1
to 9999.
Select a word address that stores the start
Number of the screen used for picture display.
Picture Display Word Address
Set a word address to store the screen Number of the screen
displayed in a Picture Display.
Set the same address as the [Word Address] of the Picture
Display placed on the Window Screen.
-
With [State Display] selected, in [Screens of
Type] select [Base Screen], in [Specify Screen] select [Address],
and in [Data Type] select [Bin].
Window Settings
Configure the Window settings.
Local/Global
Set whether to use a local window or global window for a Sub
Display.
-
Using a global window for the Sub-Display,
refer to 12.6.1 Procedure
- Changing the Window on All ScreensOn the [System Settings]
window, select [Display Unit]. In the [Action] tab, set [Global
Window Operation] to [Indirect], and [Data Type] to [Bin]. Use LS16
to display or erase the Window.
Window Screen
Designate the Screen Number of the window used for a Sub Display
from 1 to 2000.
Window Control Address
To use a local window for a Sub Display, designate the address
used to control the window display. Four consecutive words will be
used, starting from the designated address.
Set the same address as the [Window Control Address] of the
Window Part placed on the same screen as the Text Alarm Part.
12.7.2 Window - Word Action /
Basic
[Window Screen] - [Text Display Change]
Display text corresponding to the alarm message in the Message
Display part drawn on the Window Screen.
Start Screen Number
Set the Start Number of the text for a sub screen displayed in a
Message Display on the Window Screen.
Select the method to designate the text Number from [Constant]
or [Address].
Designate a set constant as the Text's Start
Number. The setting range is from 1 to 8999.
Select a word address that stores the Text
Start Number.
Text Display Word Address
Set a Word Address to store the Text File Number of the text
displayed in a Message Display. Set the same address as the [Text
File Number Word Address] of the Message Display placed on the
Window Screen.
Window Settings
Configure the Window settings.
Local/Global
Set whether to use a local window or global window for a Sub
Display.
-
When using a global window for the Sub-Display,
refer to 12.6.1 Procedure
- Changing the Window on All Screens On the [System Settings]
window, select [Display Unit]. In the [Action] tab, set [Global
Window Operation] to [Indirect], and [Data Type] to [Bin]. Use LS16
to display or erase the Window.
Window Screen
Designate the Screen Number of the window used for a Sub Display
from 1 to 2000.
Window Control Address
To use a local window for a Sub Display, designate the address
used to control the window display. Four consecutive words will be
used, starting from the designated address.
Set the same address as the [Window Control Address] of the
Window Part placed on the same screen as the Text Alarm Part.
12.7.2 Window - Word Action /
Basic
