If handling Alarm Messages, choose the cursor display shape.
Cursor Shape
Choose the cursor shape from [Vertical] or [Mirror].
Number of Pixels
If the cursor shape is [Vertical], choose the cursor thickness
from [1 dot] or [2 dots].
Configure settings for the notification of the registration
number (Row Number) of the Alarm Message selected with the
cursor.
Storage Word Address
Set the address where the registration number (Row Number) of
the selected Alarm Message will be stored.
When Alarm Messages are registered with [Bit Monitoring], the
value of the registration number (Row Number) will be directly
stored. When Alarm Messages are registered with [Word Monitoring],
the value of "the registration number (Row Number) + 10000" will be
stored.
For example, when an Alarm Message is registered with Word
Monitoring and the registration number (Row Number) of the Alarm
Message is 152:
Value stored in the [Storage Word Address] =
152 + 10000 = 10152
-
While in [Freeze Mode], the notification of the
current cursor position for cleared data is not provided.
-
Alarm Numbers cannot be acquired when
[Extended] is selected in the [Alarm Type] from the common settings
[Alarm Settings].
Acquire Cursor Position on Every Cursor
Move
Stores the Alarm Message registration number (Row Number) to
[Storage Word Address] every time the cursor moves.
