Alarm Messages can be color-coded according to whether they are
in the [Trigger], [Acknowledged], or [Recovery] state.
When Alarm Messages have levels attached during the
registration, the levels can also be color-coded.
Color
Configure color settings to correspond to the states of Alarm
Messages (Trigger, Acknowledged, and Recovery).
Change Color By Level
Select this to color code the various Alarm Messages by their
attached level set in [Alarm]. Choose the color-coding criteria
from [Level] or [State+Level].
Display the color based on the level (8
levels from 0 to 7) set in the [Block] in [Alarm].
Display the color based on the level (8
levels from 0 to 7) set in the [Block] in [Alarm], and divide each
level into colors based on the state [Trigger], [Acknowledged], and
[Recovery].
Trigger/Acknowledged/Recovery
Specify the state to set a color.
Display Color
Select a color for the Alarm Message text.
Background Color
Select a background color for the Alarm Message.
Clear Color
Select a color used when an Alarm Message is cleared or not
displayed.
Blink
Select the blink and blink speed. You can choose different blink
settings for [Display Color], [Background Color], and [Clear Color]
respectively.
