Enable Text Table
Select this check box to use the text registered in Text Tables
as an Alarm Message. The language of alarm messages can be changed
while the system is running.
18.7.2.3
Alarm Part - Item/Extended (Text Table)
-
Using a Text Table, the alarm message can be
updated on startup or at any timing by reading it from the external
memory without transferring the project data. For details on the
settings, refer to the following.
18.6
Changing Text Table Without Transferring
-
When [Expand index count] is selected in [Text
Table], the number of indexes that can be set to a text table
increases from 10,000 to 32,767.
18.7.1 Common
[Text Table] Settings Guide
Language
When entering messages without using the Text Table, select the
language of the alarm message as [Japanese], [ASCII], [Chinese
(Simplified)], [Chinese (Traditional)], [Korean], [Cyrillic], or
[Thai].
Export
Outputs the settings in CSV format.
20.14 Alarm History
Import/Export
Import
Load the settings created in CSV format.
20.14 Alarm History
Import/Export
Alarm Type
Choose from [Basic] or [Extended].
When [Extended] is selected, the number of alarm messages you
can register can be increased as follows. Also, you can set the
[Retantive Accumulation/Count] settings, [Number of Units] and
[Polling Frequency] settings by each block.
|
Display
|
Registered number
|
Registered number (Extended)
|
|
Except IPC Series
|
2048
|
32767
|
|
IPC Series
|
10000
|
32767
|
-
Depending on the mode, the number of alarm
messages cannot be expanded. For information on compatible models,
see the following.
1.5 Supported
Features
-
To use the [Extended] setting for GP3000
series, attach a GP3000 Function Expansion Memory (option). On the
System Settings window, select [Display Unit]. In the [Extended
Settings] tab set [Function Expansion Memory] to [8M].
-
For details about the [Retentive
Accumulation/Count] settings, please see the following.
20.10.1.1 Alarm Guide
-
See the following for the [Number of Units] and
[Polling Frequency].
20.10.1.2 Alarm
Settings (Block 1) - Bit Monitoring
-
If the number of Monitoring Addresses is large,
the display update may be delayed.
