From the [Common Settings (R)] menu, select [Alarm
(A)], or click . The following screen
appears. In [Language], select the alarm message display
language.
In the Block Settings, select the display mode
(History/Log/Active) for each of the blocks to which the messages
are registered, and set the number of messages stored as
history.
Select [Backup History] and define [Hide Continuing
Alarms].
When the [Backup History] check box is not
selected, the alarm history data will be erased when the display
unit is turned OFF or reset.
Click the [Trigger Condition] cell and select
whether the alarm is triggered when the Monitoring Bit Address
turns ON or turns OFF.
In [Message], enter the alarm message for the alarm
that occurs in production line 1.
In the same manner, open the [blocks 2] tab and
register the Monitoring Bit Addresses and Alarm Messages for Line
2.
Alarm settings can be exported or imported in
CSV format.
Open the screen to display the Alarms (For example,
Base 1), and first set the Alarm Part to display the Alarms for
Line 1. In the [Parts (P)] menu, select [Alarm (A)], or click
and place the Part on
the screen.
Double-click the placed Alarm. The Alarm dialog box
appears. In [Block], select [Direct].
When setting [Block] to [Address], you can
specify an address in [Display Block] to indirectly specify the
block to be displayed using its address.
In [Display Block], specify [Block 1] and set the
Display Mode.
Set the [Display Start Row], [Display Alarms] and
[Display Row Spacing].
As needed, use the [Item] tab, [Color] tab, and
[Display] tab options to change alarm message's number of display
characters, text color, background color, font, and size. Click
[OK]. The creation of the screen to display the Alarm Messages of
Block 1 is now complete.
In the [Screen (S)] menu, select [New Screen (N)],
or click . The [New Screen]
dialog box appears. In Screen, set the Base Screen Number (for
example, 2), and click [OK].
In the [Parts (P)] menu, select [Alarm (A)], in the
[Base 2] screen or click , and place the Part
on the screen.
Double-click the placed Alarm. The Alarm dialog box
appears. In [Display Block], specify [Block 2].
As needed, use the [Item] tab, [Color] tab, and
[Display] tab options to change alarm message's number of display
characters, text color, background color, font, and size. Click
[OK]. The creation of the screen to display the Alarm Messages of
Block 2 is now complete.
. The following screen
appears. In [Language], select the alarm message display
language.
and place the Part on
the screen.
. The [New Screen]
dialog box appears. In Screen, set the Base Screen Number (for
example, 2), and click [OK].
