The CSV storage format is determined by the
[Display Mode] setting. The settings are checked in the order of
[History], [Log], [Active], and data is output in the format of the
first [Display Mode] set [On].
For example, when the data of Block 1 is saved to the CF Card

In this case, the data is saved in [History] format. If [History]
were not set, the data would be saved using [Log] format.
The latest information is output on the
foreground when saved in any Display Mode.
The items such as [Trigger Date], [Trigger
Time], and [Message] have fixed outputs. If the Language is set to
other languages such as ASCII, Korea, Chinese (Simplified), Chinese
(Traditional), Cyrillic, Thai, it is shown in English.
The Date format uses the format defined in the
[Date Format] in [CSV Settings] in the common [Alarm Settings].
The Time format is fixed to "24:00:00".
When the language setting is [ASCII], the text
code uses CodePage1252. If you use text that does not exist in
CodePage 1252, it will be replaced by a single space.
Address columns for the number set in [Number
of Addresses] of each block will be output. The columns without
addresses become blank.
The address columns during data acquisition
becomes blank. If data could not be obtained due to a communication
error, it is shown as "***".