GP-Pro EX Device/PLC Connection Manual
The following table lists the TOSHIBA MACHINE PLCs, and drivers that are supported by GP-Pro EX.
For details about how to connect to the Display, click the hyperlink in the Driver column to open the manual PDF (portable document format) file for that driver.
When TC Series (TCmini/TC200) Driver is used, the GP-Pro EX Device Data Copy Tool is available. For details, refer to [Device Data Copy Tool Guide.]
Series |
CPU |
Link I/F |
Driver |
---|---|---|---|
TC200 |
TCCUH |
TCCMW |
|
TCCMO |
|||
RS-232C connector on CPU Module |
|||
TC200S |
TCCUHS TCCUSS |
TCCMWA |
|
TCCMOA |
|||
RS-232C connector on CPU Module |
|||
TCmini |
TC3-01 |
Port on CPU Module |
|
CN17A port on CPU Module |
|||
CN17B port on CPU Module |
|||
TC3-02 |
Port on CPU Module |
||
TC5-02 |
Port on CPU Module |
||
CN20A port on CPU Module |
|||
CN20B port on CPU Module |
|||
TC6-00 |
Port on CPU Module |
||
TC8-00 |
Port on CPU Module |
||
CN11 port on CPU Module |
|||
TC9-00 |
CN11 port on CPU Module |