GP-Pro EX Device/PLC Connection Manual
The following table lists the Panasonic Electric Works, Ltd. PLCs, and drivers that are supported by GP-Pro EX.
For details about how to connect to the Display, click the hyperlink in the Driver column to open the manual PDF (portable document format) file for that driver.
Please refer to [Pass-Through Function Guide] after checking the system requirements in case to use the pass through function with GP-Pro EX.
|
Series |
CPU |
Link I/F |
Driver |
|---|---|---|---|
|
FP |
FP S |
Tool port on the Control unit |
|
|
AFPG801 |
|||
|
AFPG802 |
|||
|
AFPG803 |
|||
|
AFPG806 |
|||
|
FP0 FP1 FP-M |
Tool port on the Control unit |
||
|
RS232C port on the Control unit |
|||
|
FP2 FP2SH |
Tool port on the Control unit |
||
|
RS232C port on the Control unit |
|||
|
AFP2462 |
|||
|
AFP2465+(AFP2803, AFP2804,AFP2805) |
|||
|
FP3 |
Tool port on the Control unit |
||
|
AFP3462 |
|||
|
FP-e |
Tool port on the Control unit |
||
|
AFPE224300 |
|||
|
AFPE224302 |
|||
|
AFPE224305 |
|||
|
AFPE214322 |
|||
|
AFPE214325 |
|||
|
FP10SH FP10S |
Tool port on the Control unit |
||
|
RS232C port on the Control unit |
|||
|
AFP3462 |