GP-Pro EX Ver. 4.09.500 (Update)

Summary

This update module is to modify GP-Pro EX Ver. 4.09.000 or later. If an earlier version of 4.0 (Ver. 4.00.000 to Ver. 4.09.450) is installed in your PC, see "Caution" below.
* A fee is charged for an upgrade from any version earlier than Ver. 4.0. To upgrade an earlier version of GP-Pro EX, please contact your local distributor.

Details

Last updated : August 16, 2023
Posted : August 16, 2023

Caution

• [GP-Pro EX 4.09.500 (update)] installer is only valid for Ver.4.09.200 or later.
• To update from versions earlier than Ver.4.09.200, download Disc 1 and install with a valid serial number and key code.
• Companion Software tools as mentioned in [Disc 2 Description] can only be updated by downloading Disc 2.
• For conversion services regarding updating projects edited by GP-Pro EX V3.6 or earlier, please contact your local sales office.
• GP-Pro EX  4.09.400 or later doesn't support the RPA function. (Target model: GP4000 Series and GP4000H Series)
• GP-Pro EX  4.09.500 or later doesn't support the EZ-LAN adapter for the following targets: GP4000M Series, GP41** Series, GP4000H Series
• For further information (Limitations or Cautions), please refer to the Readme file at the bottom of this page.

How to install (This is a self-extracting file.)

Prior to installation, be sure to close all software applications that are running.

• Install this software in a User Account that has Administrator privileges.
  1. Click on the file name above to start downloading the file.
  2. After download is complete, double-click on the downloaded file to start installation.
  3. Follow the instructions on the screen.
• Make sure the dialog below will be shown.
  

Operating Environment

See GP-Pro EX Operating Environment