Software Trial Version
  >GP-Pro EX Ver. 2.71.000 Trial Version

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.

 Download

Caution :

- This file is very large. Downloading over a slow connection will require a long time.
【Reference】 In the case of online speed 100Mbps
Download: About 30 to 60 minutes
Installation: About 10 minutes

If you can not download this file, please contact following E-mail address.
--> support@profaceamerica.com

If you have any questions about our product, please contact our nearest office.
--> Distributors

- This trial software does not allow transfer of the screen data which you have created to target machines (graphic operation panels except for IPCs and GP4100 series).
For further information (Limitations or Cautions) about GP-Pro EX Ver. 2.71.000 Limited Edition (Trial Version), please see Readme_E.txt.
GP-Pro EX Ver. 2.71.000 Limited Edition (Trial Version)
File Name GPProEX_V271.000_PFA.exe: 786,978KB
File Description [Disk Description]
- GP-Pro EX Ver. 2.71
- Transfer Tool
- Installation Guide
- Project Converter
- Path Through
- Pro-face Converter
- WinGP
- Movie Converter
- GP-Viewer EX
- Data Copy Tool
- GP Remote Printer Server
- Camera Viewer EX

* For more information about each tool, please refer to the following:
Product Page "GP-Pro EX"
Limitations Please see Readme_E.txt.
Fixed Defects from Ver. 2.70.100 Please see V271000_FixedDefectsList_eng.txt
New Features of Ver. 2.70.000 and above Please see V271000_NewFeaturesList_eng.txt


Installation (These files are self-extracting.)
*Prior to installation, be sure to close all software applications that are running.
[Installation of GP-Pro EX Ver. 2.7 Limited Edition (Trial Version)]
1. Click the above file "GPProEX_V271.000_PFA.exe" to download the file to the desired folder.
2. The following screen will be displayed, click the checkbox of "Not Input Serial / Key Code (Limited Edition)", and then click "Next". (If you enter your serial / key code, the software will be fully functioned.)

3. Follow the instructions given.

[Installation of Pro-face Converter]

To install Pro-face Converter, please follow the procedure below.
Failure to follow the procedure will lead to an installation failure and display the message, "Please insert DVD of Pro EX Editor in the DVD drive."

  1. Double-click the GPProEX_V271.000_PFA.exe file.
  2. Open the destination folder that is specified by the installer EXE file (C:\EXV271).
  3. Copy the file, ABS.sys, from the folder to the root folder (C:\).
  4. Double-click ProEX_Setup.exe to start the installer, and select Pro-face Converter.
  5. After installation, delete the ABS.sys file.

Last Updated : Sept. 20, 2011
Contact Us | Tech Support | Customer Care | Repairs | Privacy Policy | Terms of Use | Prop 65
Copyright (c) 1996-2019 Schneider Electric Japan Holdings Ltd. All Rights Reserved.