Limited Edition is a trial version of GP-Pro EX. You can use the software without a license (serial number and key code), however you will not be able to transfer projects to most HMIs.
ONLY GP4100 Series monochrome models will allow data transfer without a license.
Last updated: March 29, 2021
Posted: Jarch 29, 2021
- ST6000 Series has some limitations. For details, please check "Readme".
- Due to WinGP security enhancements, the key code is cleared when the system version is upgraded. Please set the key code again.
- To update earlier versions of GP-Pro EX 4.0 (Ver. 4.00.000 through Ver. 4.08.200) to ver. 4.09 or later, download the installer at the bottom of this page, and install with your current 4.0 serial number and key code.
- Be sure to download the installation module. After downloading, start installation using the file on the computer to be installed. If a network drive is used, installation cannot be performed normally.
- This file is very large. Downloading over a slow connection will require a long time.
- This trial software does not allow transfer of the screen data which you have created to target machines (except the GP4100 Series monochrome models).
- For further information (Limitations or Cautions) about GP-Pro EX Ver. 4.0 Limited Edition (Trial Version), please see the Readme at the bottom of this page.
Installation (These files are self-extracting.)
- Prior to installation, be sure to close all software applications that are running.
- Double-click the downloaded file.
- The following screen will be displayed, click the checkbox next to "Do not use Serial Number / Key Code (Limited Edition)", and then click "Next". (If you enter your serial / key code, the software will be fully functional.)
- Follow the instructions given.
- [Important] Installation of Pro-face Converter
- To install Pro-face Converter, please follow the procedure below.
Failure to follow the procedure will lead to an installation failure and display the message, "Please insert CD of GP-Pro EX Editor in the CD drive."
- GP-Pro EX Ver. 4.09.250
- Transfer Tool / Version Reverter
- GP-Viewer EX
- Camera-Viewer EX
- Data Copy Tool
- GP Remote Printer Server
- EZ Fingerprint Recognition Setting Tool
- EZ Fingerprint Recognition Unit Driver
- Pass Through
- Pro-face Remote HMI Server
- EZ Tower Light Driver
Customers Using Windows XP, Windows Vista, or Windows 8
GP-Pro EX has ended support for Windows XP, Windows Vista, and Windows 8. To use any of these operating systems, use Ver.4.09.120.