Driver Download

PLCs > LS Industrial Systems XGT Series FEnet Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.



Precautions for adding a new driver onto Windows Vista/7
Precautions for adding a new driver at Daylight Saving Time

Title LS Industrial Systems Co., Ltd XGT/XGB Series FEnet Driver
Version Ver. 1.15.04
File Name LS_XGTE.exe
File Size 774KB
Supported Software GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later
You can check your version by ”Help” function -> ”Version Info”.
Supported Devices
  • XGT Series (XGK, XGI, XGR)
  • XGB Series (XBM, XBC, XEC)
Supported Models Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX. Required driver versions for different models are listed below.

Model Required driver version
GP3000 Series Ver. 1.10.01 or later
LT3000 Series Ver. 1.13.02 or later
GP4100 Series (GP4104) Ver. 1.12.01 or later
GP4100 Series (GP4114) Ver. 1.14.04 or later
GP4000M Series Ver. 1.12.02 or later
GP4000 Series Ver. 1.12.02 or later
GP4000H Series Ver. 1.14.04 or later
LT4000M Series Ver. 1.13.02 or later
SP5000 Series Ver. 1.14.03 or later
IPC Series for WinGP Ver. 1.10.01 or later
General PCs for WinGP Ver. 1.11.01 or later
Device/PLC Connection Manual For details, please read the following
PDF: ls_xgte.pdf (707KB)

For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Content Ver. 1.15.04 (Mar. 23, 2017)
The following setting was added:
  • Support new XGK CPU models (XGK-CPUSN/XGK-CPUHN/XGK-CPUUN)

How to install (This is a self-extracting file.)

  1. Please make sure that the supported software is installed. Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
  2. Click on the file name above to start downloading the file.
  3. After download is complete, double-click on the downloaded file to start installation.
  4. Follow the instructions on the screen.
  5. After installation, start GP-Pro EX.
  6. Select [LS Industrial Systems Co., Ltd] for "Manufacturer" and [XGT/XGB Series FEnet] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
When using the driver, be sure to refer to the Device Connection Manual above (PDF file). 
Also, please refer to "Device/PLC Connection Manual" for general information regarding device connection and documentation conventions.

Update History:

[Ver. 1.15.04] (Mar. 23, 2017)

The following setting was added:
  • Support new XGK CPU models (XGK-CPUSN/XGK-CPUHN/XGK-CPUUN).

[Ver. 1.14.04]

The following defect is fixed:
  • Timer bit address access malfunction.

[Ver. 1.14.03] (Feb. 6, 2013)

The following settings were added:
  • XGT(XGI/XGR) and XGB(XBM, XBC, XEC) Series are supported.
The following issue was corrected:
  • It writes a wrong value, when writes continuous bits of the M device (or P, K, L).
  • Changed Driver Name

[Ver. 1.13.02]

The following function was added:
  • LT3000 series is supported

[Ver. 1.13.01]

The following functions were added:
  • GP4000M Series is supported.
    * To use GP4000M series, GP-Pro EX Ver. 2.71.000 or later is required.
  • GP4000 Series is supported.
    * To use GP4000 series, GP-Pro EX Ver. 3.00.000 or later is required.

[Ver. 1.12.01]

The following function was added:
  • GP4100 Series is supported.
    * To use GP4100 series, GP-Pro EX Ver. 2.70.000 or later is required.

[Ver. 1.11.01]

The following function was added:
  • Support for Device Monitor
    * To use Device Monitor, GP-Pro EX Ver. 2.00.000 or later is required.

[Ver. 1.10.01]

The file is released.

Last Updated : Mar. 23, 2017
Posted : Dec. 26, 2006

Contact Us | Tech Support | Customer Care | Repairs | Privacy Policy | Terms of Use | Prop 65
Copyright (c) 1996-2019 Schneider Electric Japan Holdings Ltd. All Rights Reserved.