Certificate Download Service
(International Safety Standards and EU RoHS directive compliance)
- Please click "
" in the list to download the certificate.
| Series |
Model No. |
EU RoHS
directives |
UL,cUL
(Control device) |
UL,cUL
(IT device) |
UL,cUL for Haz.Loc
(Control device/
UL Explosion Proof) |
UL,cUL for Haz.Loc
(IT device/
UL Explosion Proof) |
CE/
EU Declaration |
| ST6000 |
PFXST6200WAD |
 |
|
- |
- |
- |
|
| PFXST6300TADE |
| PFXST6400WAD |
| PFXST6500TADE |
| PFXST6500WAD |
| PFXST6600WAD |
| PFXST6700WAD |
| STW6000 |
PFXSTW6200WAD |
| PFXSTW6400WAD |
| PFXSTW6500WAD |
| PFXSTW6600WAD |
| PFXSTW6700WAD |
More about the standards and their associated markings.
What is ANSI/ISA 12.12.01-2007 and how does it affect UL1604?
| *1: UL60950-1 | Information Technology Equipment - Safety-Part 1: General Requirement.
(Note: For units with Haz. Loc. "UL/c-UL 1604" approval, new label
code with Haz. Loc. approval is a superset that also includes UL60950 for the particular Information Technology Equipment) |
| *2 CSA-C22.2, No.60950-1-03 | Information Technology Equipment - Safety-Part 1: General Requirement.
cUL 60950-1-03 (-03 & above)
are recognized by CSA as meeting (or exceeding) CSA-C22.2, No.60950-1-03 requirements. |
| *3: UL508 | Industrial Control Equipment (Note: For units with Haz. Loc. "UL/c-UL 1604" approval, new label
code with Haz. Loc. approval is a superset that also includes UL508 for the particular Industrial Control Equipment)
- UL508 Label information example |
| *4: CSA-C22.2, No.142-M1987 | Process Control Equipment (Note: New labels may reference UL/c-UL 508 instead) |
| *5: CSA-C22.2, No.213-M1987 | Non-incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations |
*6: ANSI/ISA-12.12.01-2007
(New UL/cUL 1604 replacement) | Equipment for Use in Hazardous (Classified) Locations, Class I, Division 2, Groups A, B, C and D.
- Older units before Haz. Loc. approval were only approved for and referenced to UL508 (check label)
- UL/CUL tested to ANSI/ISA-12.12.01-2007 used as new replacement for UL1604, required in 2012.
- Accepted as equivalent to CSA-22.2 No. 213-M1987.
- Suitable for use in Class I, Division 2, Groups A, B, C, and D Hazardous and Non-Hazardous Locations.
- When using models with the AC type power supply, be sure to attach the Power
Switch Cover.
- Haz. Loc UL Listed Label example for Industrial Control Equipment
- Haz. Loc UL Recognized Label example for Information Technology Equipment |
| Notes: |
For more Detailed information, please refer to the Manuals (Installation Guide)
- You can download Manuals from the Pro-face America Technical Resources Site. Go there. |
|
Standards and Certifications - ST6000 / STW6000
