| Product Name |
Model No. |
Description |
| GP-Pro EX Ver. 2.7 |
EX-ED-V27 |
Screen editor software (Ver.2.6 or later required to program the AGP4100 series)*1 |
| USB Transfer Cable (USB Type A/mini B) (1.8 m) |
ZC9USCBMB1 |
Cable for transferring screen data from a PC (Type A) to the GP (USB Type mini B) |
| Mitsubishi PLC Q-Series CPU I/F Cable (3m) |
ZC9CBQ31 |
Connects the GP directly to the CPU programming port on the Mitsubishi Electric PLC Q series |
| Mitsubishi PLC FX-Series CPU I/F Cable (5m) |
ZC9CBFX51 |
Connect the GP directly to the CPU programming port on the Mitsubishi Electric PLC FX series |
| Mitsubishi PLC FX-Series CPU I/F Cable (1m) |
ZC9CBFX11 |
| Mitsubishi PLC A-Series Cable (5m) |
ZC9CBA51 |
Connects the GP directly to the CPU programming port on the Mitsubishi Electric PLC A/ QnA series |
Panasonic Electonic Works PLC FP Series CPU Cable
(2m) |
ZC9CBFP21 |
Connects the GP directly to the CPU port on the Panasonic Electric Works PLC FP series |
| USB Panel-mount Extension Cable (USB Type mini B, 1m) |
ZC9USEXMB1 |
Extension cable attaching to the USB (Type mini B) port on the front side of the operation panel |
| USB Panel-mount Extension Cable (USB Type A, 1m) |
CA5-USBEXT-01 |
Extension cable attaching to the USB (Type A) port on the front side of the operation panel |
| USB-Serial (RS-232C) Conversion Cable (0.5m) |
CA6-USB232-01 |
Cable for converting a GP unit's USB interface (Type A) into a serial interface (RS-232C) |
| Screen Protection Sheet |
ZC9DS31 |
Disposable, dirt-resistant sheet for the GP unit's screen (5 sheets/set) |
USB Clamp Type A
(1Port) |
ZC9USCL1 |
USB (Type A) Cable clamp for 1 port products to prevent disconnection (5 clamps/ set) |
USB Clamp mini B
(1port) |
ZC9USCLMB1 |
USB (Type mini B) Cable clamp for 1 port products to prevent disconnection (5 clamps/ set) |
