| 1. |
In the [Sampling] setting window, set the word addresses to be displayed in the X and Y coordinate axes. |
|
|
|
To get to the [Sampling] setting window, go to the [Common Settings] menu, select [Sampling],
then click on "New". Assign a group number and click "OK". |
|
|
|
Example: Address for X Coordinate = D100, Address for Y Coordinate = D101 |
|
 |
|
|
|
|
| 2. |
Open the [XY Historical Scatter Graph] settings window. |
|
|
|
To open the [XY Historical Scatter Graph] settings window, go to the [Screen] menu, then open the screen you are placing
your graph on. Select the [Parts] menu, [XY Scatter Graph], then [XY Historical Scatter Graph]. |
|
|
| 3. |
On the [Graph] tab, click [Channel Settings].
|
|
 |
|
|
| 4. |
The [Channel Data Settings] window will open. Set the [Number of Channels], [X Coordinate Address],
and [Y Coordinate Address]. |
|
 |
|
|
| 5. |
Click [Extended]. |
|
 |
|
|
| 6. |
Select the appropriate [Group Number] (from [Sampling]). Under [Display Method], specify [Show Scale] and the [Normalize] tab will appear.
|
|
 |
|
| NOTE |
| [Normalize] settings are only available when [Show Scale] is specified. |
|
|
|
| 7. |
Check the [Normalize] box, then set the [Control Word Address], [X Coordinate Data Start Address],
[Y Coordinate Data Start Address], etc. |
|
|
|
 |
|
|
|
|
|
| NOTE |
|
To use this feature, your screen editor must be GP-Pro EX Ver. 2.20 or above.
|
|
