 |
|
| Printer
Connection |
|
| |
| The AGP3000 series can be connected to a
printer via the COM ,USB or LAN port. |
|
|
| |
|
|
| |
|
*1
|
The AGP3301 Series and AGP3302B Series
do not have a LAN port |
|
*2
|
If your model is an AGP3750 Series, no
printer can print the GP screen on 1 sheet as the screen size of the
AGP3750 is too large. |
| |
|
|
To connect a printer to the AGP3000 via USB port, there
are 4 ways as follows;
1) Direct connection of the USB printer port to the AGP3000 USB port
2) Convert the parallel port of the printer to a USB port and connect
it to the USB port of the AGP3000
3) Use the COM1 port
4) Ethernet (LAN) port
|
| |
|
-Connecting
to the USB Port Directly
|
|
|
|
Supported Printer Commands |
| |
| NEC PR201 |
|
EPSON ESC/P High Speed
|
| EPSON ESC/P High Quality |
| HP Laser Jet |
| EPSON PM/Stylus (6 color ink) |
| EPSON PM/Stylus (4 color ink) |
| Text ASCII |
|
| |
|
|
|
Tested and Approved Printers
|
| |
| Manufacturer |
Model |
Type |
Comments |
| EPSON |
Stylus Photo
R200,R260 |
Inkjet Printer |
Use USB cable FP-US00 |
|
|
| |
*1: When using the PM-G730,
please set a 3mm margin at the top edge via the printer settings.
Otherwise, the first line will overlap when printing texts on Alarms or
the sampled data.
*2: The printer may not operate properly with GP-Pro EX Ver.1.00.006 or
lower.
*3: Color printing is not available. |
| |
|
| |
European model
(This model may be only for the European market.) |
| |
| Manufacturer |
Model |
| EPSON |
EPL-6200 |
|
| |
|
|
|
Printer
Cable |
| |
To connect the USB
port on the GP to the printer's USB port directly, use FP-US00 (product
of Pro-face) or any commercial USB cable. |
|
|
| |
|
-Converting the Printer's
Parallel Port (PIO)
|
|
|
|
Supported Printer Commands |
| |
NEC PR201 |
| |
EPSON ESC/P High Speed |
|
|
EPSON ESC/P High Quality |
| |
HP LASERJET |
| |
EPSON PM/Stylus (6 color ink) |
| |
EPSON PM/Stylus (4 color ink) |
| |
Text ASCII |
| |
|
|
|
Tested
and Approved Printers |
| |
| Manufacturer |
Model |
Type |
Comments |
| NEC |
PC-PR201-PL |
Command
Printer
|
Use USB conversion cable IEEE1284 (commercially available) |
| EPSON |
ECS/P24-J84(C) |
Command
Printer
|
Use USB conversion cable IEEE1284 (commercially available) |
|
|
|
|
|
|
|
Printer
Cables |
| |
To use the parallel Centronix port,
convert the port to a USB port by a commercial USB-PIO conversion
adapter and connect it to the USB port on the AGP. |
| |
|
| |
|
| -Connecting a Printer to the COM1 Port |
|
| |
|
|
Supported Printer Commands |
| |
NEC PR series |
| |
EPSON ESC/P High Speed |
|
|
EPSON ESC/P High Quality |
| |
HP LASERJET |
|
|
EPSON PM/Stylus (6 color ink) |
|
|
EPSON PM/Stylus (4 color ink) |
| |
Text ASCII |
|
|
| To connect to a serial
printer, D-script programming in GP-Pro EX is required. The print
commands can be sent from the COM1 port on the AGP3000 series to the
printer. |
| |
| |
-Connecting a Printer to an Ethernet (LAN) Port
|
|
IPP (Internet Print Protocol) or LPR (printing service
for UNIX) is supported by GP-Pro EX. If you share the printer on a
network, you can print the screen image via a LAN network. When a
printer without a LAN port is connected, use the print server or
connect to a PC.
In these cases, please refer to the following important
notes.
|
(1)
(2)
(3)
|
The AGP3000 series can
only print the screen image.
Some printers require a few minutes to print.
The supported printer commands are NEC PR series, EPSON ESC/P, HP
LASERJET series, EPSON PM/Stylus (6 color ink), EPSON PM/Stylus (4
color ink). Other printer commands are not supported by the AGP3000
series. |
| |
|
|
Supported Printer Commands |
| |
NEC PR series |
| |
EPSON ESC/P High Speed |
|
|
EPSON ESC/P High Quality |
| |
HP LASERJET |
| |
EPSON PM/Stylus (6 color ink) |
| |
EPSON PM/Stylus (4 color ink) |
|
|
Text ASCII |
| |
| |
