 |
|
| How to adjust the brightness of the AGP3000 |
|
Displaying the Brightness Adjustment Bar
|
Touch the display's top right corner, release, and then touch the top left corner
within 0.5 seconds. A brightness adjustment bar will appear at the bottom of the screen. |
|
 |
|
 |
|
 |
|
With the [+] and [-] keys of the Brightness/Contrast Control Bar, set the strength or
weakness as needed. Close the bar by touching the [X]. For AGP3000 TFT color models, only the brightness
can be adjusted.
|
Important
|
| ・ |
When the AGP is booting, it is not possible to enter this mode. |
| ・ |
This operation is possible even while communicating with the PLC. |
| ・ |
By default, the factory sets the AGP for maximum brightness (8-levels of adjustment). |
|
|
|
