FAQ > GP2000/ST > Project Download Cables

Technical Resources

FAQ

Project Download Cables

Currently available project download cables are the [GPW-CB02] or [GPW-CB03].
[HMI-CAB-C49] and [GP430-CU02-M] have been discontinued.

	GPW-CB03 (*1)	GPW-CB02	HMI-CAB-C49	GP430-CU02-M
Communication Type	USB	RS-232C
Supported GP Models	GP/GLC/LT/ST *30 series or later
Connector Shape	PC side: USB GP side: 8 pin DIN	PC side: 9 pin D-sub GP side: 8 pin DIN		PC side: 25 pin D-sub GP side: 8 pin DIN
Recommended Conversion Connector	A conversion connector cannot be used.	For conversion to USB, use CA6-USB232-01 (*2)		For conversion to a 9 pin D-sub, use a straight conversion connector (commercially available.)

*1 Supported in GP-PRO/PB3 C-Package 02 ver. 6.30 or later. It is necessary to install the USB Driver separately.

*2 Most commercially available USB to RS-232C converters do NOT work with GP-Pro/PBIII. Please use the part number listed for guaranteed operation.

Other Transfer Methods

* Ethernet
For GP/GLC2000 and ST403 units equipped with an Ethernet port, it is possible to download projects directly from the PC to the GP/ST with an ethernet crossover cable, part number HMI-CAB-ETH. If you are downloading through a hub, use a standard straight ethernet cable (commercially available.)

* CF Cards
CF cards can be used to transfer projects and files with all of the GP2000 series models.
Please use CF cards provided by Pro-Face. Operation of commercial CF cards cannot be guaranteed.

Return to Top

Back

Protection of Personal Information | Trademark Acknowledgments | Terms of Use