Technical Resources
Register
LogIn
Products
Downloads
Contact Us
Repair
Support Home
 
FAQ
■
Hardware
USB
How can I use the USB port in the AGP3000 series?
Can the USB port be mounted on the front of an enclosure?
USB devices are not recognized by the HMI.
What can I do with the USB port?
Precautions for using USB storage devices
Can I use any USB storage device?
Multimedia
What do I need to order if I want to use Multimedia?
Video Module Unit (GP3000-VM01) for AGP3000 Series
What type of touch panel can I connect the VM unit to?
What screen creation software is used with the VM3000 module?
How can I input/output video images?
Settings for Daisy Chain Connections
Connecting the VM unit to a PC or a monitor with an analog RGB connector.
I want to operate an external PC via a touch panel.
What additional clearances are needed when the VM3000 unit is installed on an AGP?
I want to replace the GP2000 VM unit with the GP3000 VM unit.
How many screens can I view simultaneously?
RGB Input Unit
How to display images from 2 PCs simultaneously.
About Video Control Area.
Hand-held GP
Controlling two or more devices with one hand-held GP
Video Module Unit (GP2000-VM41)
Can I Use the VM (Video Module) Unit from my old GP2000 with an AGP3000?
Which models from the AGP3000 series can be connected to the VM (Video Module) Unit?
How can I input or output video images?
Movie Settings
What is the SDX movie format? Do you support formats like MPEG or AVI?
With the AGP3*50 series, is it possible to display the PC's video image on the AGP without optional equipment?
What connector is needed when using the internal video interface on the AGP3*50?
Optional Products
What optional accessories are available for the AGP3000/AST3000/LT3000 Series?
Is it possible to field replace the backlight?
What are the differences between the GP2000 series protection sheets and the AGP3000 series protection sheets?
What is the size and part number of the screen protection sheets?
Cable and Adapter Pinout Drawings
About Function Expansion Memory
Peripheral Devices
Can I connect a printer using the centronix interface?
Connecting a Bar Code Reader
Printer connections
Transfer Cable
How long is the project download cable?
Can the project download cable for the GP2000/77R/70/GLC2000/150/ST400 series be used for the AGP3000/AST3000/LT3000 series?
Operation of the Main Unit
How do I enter into off-line mode?
How to adjust the brightness of the AGP3000 series
Calibrating the Touch Panel
Errors of the main Unit
The Green LED Lamp on the AGP3000 is blinking.
Flashing Red LED
Specifications of the Main Unit
Is the AGP3000 series cutout compatible with older GP and PanelStation (QuickPanel) units?
Is the AGP3000 or LT3000 cutout compatible with Panelview products?
Which models of the AGP3000 Series have built in I/O?
AGP3000 Series Hardware Differences
What is the lifetime of the AGP3000's backlight?
What is the AGP3000 series MTBF (Mean Time Between Failures)?
Features/Functions that are not supported by AGP3300 revisions earlier than Rev 4.
Remote Maintenance
What modems have been tested and approved for the AGP?
What is the recommended USB to Serial Conversion Cable?
↑
Back to page top
<--
Returns to the previous page
Protection of Personal Information
|
Trademark Acknowledgments
|
Terms of Use
© Copyright 2004-2012. Pro-face. All rights reserved.